Q and Answer: How High Should Trousers Come Up?
Peter writes to us to ask: I read Monty Don’s article about dirty attire and I love the idea of high waisted men’s pants. But how high is too high? Also, where might I find such pants?
Although there are guidelines for how trousers should fit, there aren’t many rules for how they should be styled. The rise of your trousers is largely about your taste, body type, and the prevailing fashions of the day. Slimmer men can get away more easily with lower rises, while heavier men often need something higher, but at the end of the day — it about what looks good on you. Personally, I find rise to be something of a balancing act. 
For trousers I might wear with a coat and tie, I prefer a higher rise for three reasons. First, it helps avoid that dreaded shirt triangle that Jesse wrote about, where the bottom of your shirt peeks out from beneath your jacket. It also gives a longer leg line, and better proportions between the torso and legs — which I find to be nice when the jacket is worn open. You can see this demonstrated by Jake from The Armoury here. 
The problem with a rise that’s too high, however, is that unless you’re extraordinarily handsome (like Cary Grant & Co. above), they can look unflattering when you’re not wearing a jacket. Possibly not a big deal if you never remove your coat, but something to consider if you do. 
So, finding that sweet spot — where a rise is high, but not too high — is largely personal, and dependent on your dress habits, taste, and body type. For myself, I prefer trousers that come up just below my navel, although for more casual pants (i.e. anything I wouldn’t wear with a tailored jacket), I don’t mind going lower. Note, the higher you go, the more you might want to consider pleats. They’ll help visually break up that expanse of fabric that can take up your upper thighs and hips. 
Unfortunately, there aren’t many good options when it comes to higher rise pants. Ralph Lauren used to have something they called their Preston fit — which I thought was great — but they recently remodeled their whole line of trousers, so all the old cuts have been discontinued. You might want to stop by one of their stores to check out the new line, and to see if any Preston cuts are on sale. The ones made in Italy are exceptionally nice, but they’re also very expensive. Note that the legs will be a bit full, but you can have them slimmed from the knee down. 
Outside of them, there’s Brooks Brothers’ Black Fleece, O’Connell’s, and J. Press for dress pants, and then Ring Jacket, Jack Donnelly’s Dalton cut and Bill’s Khaki’s M2 model for chinos. For what Monty Don was wearing, you can check Old Town. Worse comes to worse, if you can’t find anything you like, you can also try made-to-measure through J. Hilburn or Luxire. 

Q and Answer: How High Should Trousers Come Up?

Peter writes to us to ask: I read Monty Don’s article about dirty attire and I love the idea of high waisted men’s pants. But how high is too high? Also, where might I find such pants?

Although there are guidelines for how trousers should fit, there aren’t many rules for how they should be styled. The rise of your trousers is largely about your taste, body type, and the prevailing fashions of the day. Slimmer men can get away more easily with lower rises, while heavier men often need something higher, but at the end of the day — it about what looks good on you. Personally, I find rise to be something of a balancing act. 

For trousers I might wear with a coat and tie, I prefer a higher rise for three reasons. First, it helps avoid that dreaded shirt triangle that Jesse wrote about, where the bottom of your shirt peeks out from beneath your jacket. It also gives a longer leg line, and better proportions between the torso and legs — which I find to be nice when the jacket is worn open. You can see this demonstrated by Jake from The Armoury here

The problem with a rise that’s too high, however, is that unless you’re extraordinarily handsome (like Cary Grant & Co. above), they can look unflattering when you’re not wearing a jacket. Possibly not a big deal if you never remove your coat, but something to consider if you do. 

So, finding that sweet spot — where a rise is high, but not too high — is largely personal, and dependent on your dress habits, taste, and body type. For myself, I prefer trousers that come up just below my navel, although for more casual pants (i.e. anything I wouldn’t wear with a tailored jacket), I don’t mind going lower. Note, the higher you go, the more you might want to consider pleats. They’ll help visually break up that expanse of fabric that can take up your upper thighs and hips. 

Unfortunately, there aren’t many good options when it comes to higher rise pants. Ralph Lauren used to have something they called their Preston fit — which I thought was great — but they recently remodeled their whole line of trousers, so all the old cuts have been discontinued. You might want to stop by one of their stores to check out the new line, and to see if any Preston cuts are on sale. The ones made in Italy are exceptionally nice, but they’re also very expensive. Note that the legs will be a bit full, but you can have them slimmed from the knee down. 

Outside of them, there’s Brooks Brothers’ Black Fleece, O’Connell’s, and J. Press for dress pants, and then Ring JacketJack Donnelly’s Dalton cut and Bill’s Khaki’s M2 model for chinos. For what Monty Don was wearing, you can check Old Town. Worse comes to worse, if you can’t find anything you like, you can also try made-to-measure through J. Hilburn or Luxire

The Popover Shirt
Summer is a great time for slightly more casual takes on tailored clothing, and there’s no easier way to dress down a tailored jacket than by using a slightly more casual shirt. So instead of the finely woven cotton dress shirts you might use for the office, consider something in a linen or linen blend. Bolder patterns can also make a shirt look more casual, although you want to be wary of anything that looks too busy. I find blue and white Bengal stripes to be the most useful.
I’ve also come to really like popovers, which is a pullover style with a half placket front. Before sport shirts were made with coat fronts – where the opening went from the collar down to the hem, like a coat – they were made with half-plackets such as this button-down. Nowadays, popovers can be seen a sort of “in-between.” They’re more relaxed than a traditional shirt, but dressier than a polo, which makes them great for those days you want to look sharp, but casual.
The problem with popovers is that they can be sometimes hard to fit. Unlike long-sleeved polos or rugbys – which are styled similarly – these are constructed from a woven, rather than knitted, material. Which means they’re less stretchy. So, in order to easily slide in and out of these things, you want your shirt to be cut a little bigger, but not so big that it looks baggy when worn. 
I ended up going through my shirtmaker Ascot Chang in order to get the right fit, but you could also try many of the ready-to-wear options and be more exacting with your alterations tailor. Try Sid Mashburn, Gitman Brothers, J. Crew, G. Inglese, Individualized Shirts, Fun Time Shirt Company, and Ralph Lauren to start. For something custom, check out Mercer & Sons, Luxire, and our advertiser Proper Cloth. The first will do made-to-order, where you can customize your shirt from a wide range of pre-selected options, while the last two can do made-to-measure, where you’ll get a shirt made according to the body measurements you submit online.  

The Popover Shirt

Summer is a great time for slightly more casual takes on tailored clothing, and there’s no easier way to dress down a tailored jacket than by using a slightly more casual shirt. So instead of the finely woven cotton dress shirts you might use for the office, consider something in a linen or linen blend. Bolder patterns can also make a shirt look more casual, although you want to be wary of anything that looks too busy. I find blue and white Bengal stripes to be the most useful.

I’ve also come to really like popovers, which is a pullover style with a half placket front. Before sport shirts were made with coat fronts – where the opening went from the collar down to the hem, like a coat – they were made with half-plackets such as this button-down. Nowadays, popovers can be seen a sort of “in-between.” They’re more relaxed than a traditional shirt, but dressier than a polo, which makes them great for those days you want to look sharp, but casual.

The problem with popovers is that they can be sometimes hard to fit. Unlike long-sleeved polos or rugbys – which are styled similarly – these are constructed from a woven, rather than knitted, material. Which means they’re less stretchy. So, in order to easily slide in and out of these things, you want your shirt to be cut a little bigger, but not so big that it looks baggy when worn. 

I ended up going through my shirtmaker Ascot Chang in order to get the right fit, but you could also try many of the ready-to-wear options and be more exacting with your alterations tailor. Try Sid Mashburn, Gitman Brothers, J. Crew, G. Inglese, Individualized Shirts, Fun Time Shirt Company, and Ralph Lauren to start. For something custom, check out Mercer & Sons, Luxire, and our advertiser Proper Cloth. The first will do made-to-order, where you can customize your shirt from a wide range of pre-selected options, while the last two can do made-to-measure, where you’ll get a shirt made according to the body measurements you submit online.  

Finding a Higher Rise Chino
For the last few months, I’ve been looking for chinos built with a higher rise. As some readers may know, I favor pants that sit higher on the hips, as I find this helps elongate the leg line and gives better proportions between the torso and legs. Unfortunately, it’s not easy to find such pants nowadays, as the fashion trend for the last ten years has been for low-rise cuts. After writing a post about my search, however, a few kind readers sent me some good suggestions. 
The first, and I think the best, is from The Armoury. These are made by Ring Jacket, a high-end Japanese company known for their tailored clothing. They sit just below the navel, which is high enough to give the effect you’d want, but low enough so you can wear your chinos without a sport coat. The leg is also nice and slim, and the trousers are lined a bit past the knee. You can see them worn by Mark in the photo above.
The Armory’s chinos cost $370, which is pricey, but the pants are exceptionally well built. They’re not available on the website, so you’ll have to email or call them to order. 
A bit more affordable are the ones from J. Press, which were recommended to me by Bruce Boyer. These are fuller in the leg and sit higher on the waist. I think these are some of the nicest traditionally cut trousers I’ve ever come across, but the higher-waisted cut does mean you should probably wear them with sport coats. If you plan to, the price here starts at $120, but there are occasional seasonal sales that will drop them down by 25%. 
More affordable still is Jack Donnelly’s Dalton chinos, which come in both a slim and traditional cut. The slim is more like The Armoury’s, while the traditional is more like J Press’. The difference is that the fabric isn’t as nice, the fit not as clean (at least on me), and the finishing inside is a bit rough (almost unusually so, actually). On the upside, they’re $95 and they have a very nice return policy, so trying them out is more or less risk-free. 
A couple of other good ideas were sent to me. Bill Khaki’s M2 model is a favorite for many people, and some recommended the custom chinos at J. Hilburn and Luxire. Luxire can copy an existing pair of pants for you, which is nice if you’re wary of the made-to-measure process. One reader also recommended these Blackbird chinos, though they’re on final sale, and thus not returnable.
(Photo above by The Armoury)

Finding a Higher Rise Chino

For the last few months, I’ve been looking for chinos built with a higher rise. As some readers may know, I favor pants that sit higher on the hips, as I find this helps elongate the leg line and gives better proportions between the torso and legs. Unfortunately, it’s not easy to find such pants nowadays, as the fashion trend for the last ten years has been for low-rise cuts. After writing a post about my search, however, a few kind readers sent me some good suggestions. 

The first, and I think the best, is from The Armoury. These are made by Ring Jacket, a high-end Japanese company known for their tailored clothing. They sit just below the navel, which is high enough to give the effect you’d want, but low enough so you can wear your chinos without a sport coat. The leg is also nice and slim, and the trousers are lined a bit past the knee. You can see them worn by Mark in the photo above.

The Armory’s chinos cost $370, which is pricey, but the pants are exceptionally well built. They’re not available on the website, so you’ll have to email or call them to order. 

A bit more affordable are the ones from J. Press, which were recommended to me by Bruce Boyer. These are fuller in the leg and sit higher on the waist. I think these are some of the nicest traditionally cut trousers I’ve ever come across, but the higher-waisted cut does mean you should probably wear them with sport coats. If you plan to, the price here starts at $120, but there are occasional seasonal sales that will drop them down by 25%. 

More affordable still is Jack Donnelly’s Dalton chinos, which come in both a slim and traditional cut. The slim is more like The Armoury’s, while the traditional is more like J Press’. The difference is that the fabric isn’t as nice, the fit not as clean (at least on me), and the finishing inside is a bit rough (almost unusually so, actually). On the upside, they’re $95 and they have a very nice return policy, so trying them out is more or less risk-free. 

A couple of other good ideas were sent to me. Bill Khaki’s M2 model is a favorite for many people, and some recommended the custom chinos at J. Hilburn and Luxire. Luxire can copy an existing pair of pants for you, which is nice if you’re wary of the made-to-measure process. One reader also recommended these Blackbird chinos, though they’re on final sale, and thus not returnable.

(Photo above by The Armoury)

A Popover for Summer
The spate of hot weather recently had me thinking about what kind of shirts I might like to get this summer. High on the list are popovers. A popover is a woven shirt with a placket that only goes partially down the chest. I suspect they’re a holdover from when sport shirts weren’t all made with coat fronts (an early version of such a design can be seen here). They’re less common now, but I think they can look quite good on men with slim stomachs. They’re more relaxed than a traditional shirt, but more dressed up than a polo shirt, and this in-between-ness makes them just right for when you want to look smart on casual days.
I bought this one from Gant two years ago, but sadly the cut didn’t work out for me, so now I’m on the market for another. The nicest one I’ve seen is by Isaia, which is pictured above. My friend Agyesh, who actually took the image shown, works for Isaia and tells me that the brand still makes these. They should be available at Saks Fifth Avenue (especially the one in New York City), but if not, any store that offers Isaia’s made-to-measure program will be able to custom make one for you. You can get the model above, or one with a button-down collar and mitered placket. 
In addition, Sid Mashburn has some very handsome ones with a deep, long placket. Epaulet, New England Shirt Company, and Wharf also look promising. 
For something a bit more fashion forward, there’s a small selection at Need Supply, and a few designs by Engineered Garments this season at French Garment Cleaners and Oi Polloi. Steven Alan happens to have one of them on sale, which you can knock another 15% off by signing up for their newsletter. For something a bit more workwear-ish, check out Thoroughstitch and Levis Vintage Clothing.
All the aforementioned companies make really nice shirts, but they can be a bit expensive. If you want something more affordable, and don’t mind short-sleeves, J Crew has a bunch on sale right now. You can take 30% off the listed price by punching in the code SUMMER at checkout.
And finally, for people who need a special size, there are a number of options for custom. In addition to the Isaia you see above, Individualized Shirts and Mercer & Sons have made-to-order programs. They’re not exactly made-to-measure, meaning you can’t get things made to your exact measurements, but you can choose from different cuts and patterns to get the shirt you need (for Individualized, you’ll have to go to their factory, however). Luxire also makes them through an online made-to-measure service, and I can recommend my shirtmaker Ascot Chang for bespoke. Ascot Chang is actually running a promotion right now where you can get one shirt free for every six you order. Granted, they’re not cheap – so buying six at a time is pretty expensive – but they do fantastic work and offer tremendous value at their price point. You can visit them at one of their stores, or catch them on their US tour this month. 
(Photo credit: Mad House, Inc)

A Popover for Summer

The spate of hot weather recently had me thinking about what kind of shirts I might like to get this summer. High on the list are popovers. A popover is a woven shirt with a placket that only goes partially down the chest. I suspect they’re a holdover from when sport shirts weren’t all made with coat fronts (an early version of such a design can be seen here). They’re less common now, but I think they can look quite good on men with slim stomachs. They’re more relaxed than a traditional shirt, but more dressed up than a polo shirt, and this in-between-ness makes them just right for when you want to look smart on casual days.

I bought this one from Gant two years ago, but sadly the cut didn’t work out for me, so now I’m on the market for another. The nicest one I’ve seen is by Isaia, which is pictured above. My friend Agyesh, who actually took the image shown, works for Isaia and tells me that the brand still makes these. They should be available at Saks Fifth Avenue (especially the one in New York City), but if not, any store that offers Isaia’s made-to-measure program will be able to custom make one for you. You can get the model above, or one with a button-down collar and mitered placket. 

In addition, Sid Mashburn has some very handsome ones with a deep, long placket. EpauletNew England Shirt Company, and Wharf also look promising. 

For something a bit more fashion forward, there’s a small selection at Need Supply, and a few designs by Engineered Garments this season at French Garment Cleaners and Oi PolloiSteven Alan happens to have one of them on sale, which you can knock another 15% off by signing up for their newsletter. For something a bit more workwear-ish, check out Thoroughstitch and Levis Vintage Clothing.

All the aforementioned companies make really nice shirts, but they can be a bit expensive. If you want something more affordable, and don’t mind short-sleeves, J Crew has a bunch on sale right now. You can take 30% off the listed price by punching in the code SUMMER at checkout.

And finally, for people who need a special size, there are a number of options for custom. In addition to the Isaia you see above, Individualized Shirts and Mercer & Sons have made-to-order programs. They’re not exactly made-to-measure, meaning you can’t get things made to your exact measurements, but you can choose from different cuts and patterns to get the shirt you need (for Individualized, you’ll have to go to their factory, however). Luxire also makes them through an online made-to-measure service, and I can recommend my shirtmaker Ascot Chang for bespoke. Ascot Chang is actually running a promotion right now where you can get one shirt free for every six you order. Granted, they’re not cheap – so buying six at a time is pretty expensive – but they do fantastic work and offer tremendous value at their price point. You can visit them at one of their stores, or catch them on their US tour this month. 

(Photo credit: Mad House, Inc)